外浮顶罐充氮管网设计及有效性试验验证

为了预防外浮顶罐密封圈雷击火灾,提出在密封圈内充入氮气的保护方法.将安全含氧量作为充氮的惰化目标,对外浮顶罐充氮管网进行设计,并通过试验来验证充氮管网的有效性.试验得到了充氮流量、进出气孔数量及管径与有效充氮时间的关系.若以142 m3/h的流量对容量为10×104 m3的外浮顶罐密封圈内充氮,则46.5 min内可以达到充氮惰化目标.雷电预警时间为60 ～ 90 min的条件下,充氮时间小于预警时间,表明所设计的管网是有效的.     

Improved models of failure time for atmospheric tanks under the coupling effect of multiple pool fires

Fire accidents of chemical installations may cause domino effects in atmospheric tank farms, where a large amount of hazardous substances are stored or processed. Pool fire is a major form of fire accidents, and the thermal radiation from pool fire is the primary hazard of domino accidents. The coupling of multiple pool fires is a realistic and important accident phenomenon that enhances the propagation of domino accidents. However, previous research has mostly focused on the escalation of domino accidents induced by a single pool fire. To overcome the drawback, in this study, the failure of a storage tank under the coupling effect of multiple pool fires was studied in view of spatial and temporal synergistic process. The historical accident statistics indicated that the accident scenario of two-pool fires accounted for 30.6% in pool fires. The domino accident scenario involving three tanks is analyzed, and the typical layout of tanks is isosceles right triangle based on Chinese standard “GB50341-2014”. The thermal response and damage of a target tank heated by pool fires were numerically investigated. The volume of 500 m³, 3000 m³, 5000 m³ and 10000 m³ were selected. Flame temperature was obtained by FDS, and then was input onto the finite element model. The temperature field and stress field of target tanks were simulated by ABAQUS. The results showed that the temperature rise rate of the target tanks under multiple pool fires was higher than that under a single pool fire. The failure time of the tank under the coupling effect of multiple fires was lower than that under the superposition of multiple fires without the first stage. The stress and yield strength were compared to judge the failure of the target tank. The model of failure time for the tank under the coupling effect of pool fires was established. Through the verification, the deviation of this model is 4.02%, which is better than the deviation of 15.76% with Cozzani's model.     

液化石油气槽车泄漏处置专用接头套组的应用探讨

针对消防救援车辆缺乏专业堵漏和倒罐装备、应急处置受限等问题,研究采用专用注压接头套组与消防车配合,通过向事故槽车阀门注水加压或惰性气体的方式实施辅助堵漏,能够实现因地制宜、快速有效地解决现场液化石油气大量泄漏的问题,降低事故危害。     

连续流反应器中培养好氧颗粒污泥的运行效能研究

在连续流完全混合反应器(CSTR)中,采用不同进水方式,以乙酸钠作为碳源配制的人工配水作为原水,对好氧颗粒污泥的运行效能进行了试验研究。研究表明,采用不同进水方式运行的2个反应器在颗粒污泥出现后,运行效能差别不大;好氧颗粒污泥反应器运行高效稳定,在水力停留时间为1.5h、COD容积负荷为1.0kg/(m3·d)的条件下,对COD、TP、NH4+-N和TN的去除率分别为90%、85%、95%和60%,并具有明显的脱氮除磷效果;反应器中存在同步硝化反硝化现象。     

稠油污水回用锅炉处理工艺的应用

新疆油田公司稠油污水处理普遍采用成熟的离子调整旋流反应水处理技术,污水处理后达到回用锅炉水质标准SY/T 0097-2000《稠油油田采出水用于蒸汽发生器给水处理设计规范》,供给油田专用高压注汽锅炉用水。采用相同技术建成的采油一厂稠油处理站污水回用锅炉处理工艺投用后,处理后污水回用锅炉,减少了含油污水的外排,充分利用了稠油污水的热能,取得了良好的经济和社会效益。     

某型飞机4号油箱结构损伤分析及修复评估

目的 某型双座机使用中发现4号油箱存在不同程度结构损伤,分析其损伤原因和制定修理方案。方法 对4号油箱结构状态进行深入检查评估后,从结构损伤过程、载荷情况、设计制造和外场使用等方面综合分析损伤原因。对实际损伤结构进行强度计算和评估,制定结构损伤补强修理方案,并提出修理改进建议。结果 通过分析得出,损伤原因主要是4号油箱局部存在设计制造缺陷,且飞机在作大过载飞行时,4号油箱可能处于满油或大量余油的高负载状态。根据损伤原因制定的修理方案合理可行,通过了静强度校核和评估。结论 基于该损伤结构提出的修理方案通过实际修理验证,能够满足油箱结构强度设计要求,提出的改进建议能够改善飞机疲劳品质。     

FPSO工艺水舱阳极快速消耗原因分析

目的 研究FPSO工艺水舱中铝牺牲阳极消耗过快的原因。方法 参照GB 17848—1999牺牲阳极电化学性能试验方法,对比水舱环境与普通环境下,在役阳极的电化学性能数据,并模拟水舱环境,监测阳极工作时实际的发生电流与工作电位等情况,据此分析牺牲阳极在工艺水舱中消耗过快的原因。结果 在常温（25 ℃）、常温充空气、高温（65 ℃）充空气等条件下,阳极的电化学容量分别是2522.07、2464.29、1943.74 Ah/kg,且高温（65 ℃）充空气环境下阳极的晶间腐蚀较其他两组试验严重许多,说明温度是影响阳极电化学容量的关键因素。在模拟工艺水舱环境下,实测的阳极发生电流最高可达100 mA。将工艺水与海水1:5稀释后,实测的保护电流密度最高达45 mA,说明工艺水中存在大量的去极化剂,是造成阳极快速消耗的又一重要因素。结论 工艺水舱环境下,阳极发生严重的晶间腐蚀,严重影响了阳极的电化学容量,使阳极寿命缩短。工艺水成分中含大量去极化剂,使船舱所需的保护电流密度大大增加,促使阳极发生电流加大,亦缩短了阳极的实际服役寿命。     

基于粒子群-支持向量机(PSO-SVM)的苯储罐泄漏事故风险预测

将支持向量机(SVM)模型运用于事故前苯储罐泄漏事故风险预测,为使模型性能最优, 用粒子群算法PSO优化SVM模型参数,建立了PSO-SVM风险预测模型。为验证模型风险预测性能,分别采用遗传算法(GA)和网格搜索法(GS)优化SVM参数,并比较测试集与PSO-SVM、GA-SVM、GS-SVM三种模型预测结果的均方误差及相关系数。然后进一步探讨模型中权重调整方式、种群规模对PSO-SVM模型预测性能的影响。研究发现,权重线性递减所建PSO-SVM预测值与测试集相关系数更高、均方误差更小、预测效果更好,种群规模没有影响PSOSVM模型预测值但会影响计算时间,这为危化品泄漏事故的风险预测提供了一种新的方法。     

Performance of a novel vertical-flow settler: a comparative study

By increasing particle concentration and G value （root-mean-square velocity gradient） to enhance flocculation, a novel vertical-flow settler was designed to increase sedimentation effectiveness, and to simultaneously improve operational stabilization. Due to the gradual decrease in upward flow-rate of raw water, a floes blanket would form and suspend in the middle section of the settler, not at the bottom as in a conventional clarifier. Enough large floes, resulted from flocculation or fltration, would continuously settle out of the floes blanket, and simultaneously, the floes in raw water or those forming above the blanket would ceaselessly enter the floes blanket. As a result, the floes concentration in the blanket could keep a dynamic balance. The hydrodynamic shear in the blanket was improved by flow separation, which was induced by the abrupt change in flow channel. Due to the floes blanket and improved hydrodynamic shear, flocculation would be enhanced, which was helpful for removing fine particles in raw water. A comparative study showed that the novel vertical-flow settler had a much better performance in the removal of the particles in raw water than a conventional one, when they treated kaolin suspensions of different concentrations （500, 100 and 50 mg/L, respectively） coagulated by polyaluminum chloride（PAC1） at the up-flow rates of 1 and 2 mm/s, respectively.     

外浮顶储罐泡沫灭火设施的选型

分析了外浮顶储罐火灾危险性及火灾类型,对目前泡沫灭火设施在外浮顶储罐中的应用及存在的问题进行阐述,建议外浮顶储罐的泡沫灭火设施采用边缘泡沫消防系统.